MAC / OUI Lookup

Enter a MAC address in any common format to normalize it and identify its manufacturer from the OUI. Runs entirely in your browser — the address is never sent anywhere.

Input

Accepts colon, hyphen, Cisco dot, or plain formats.

Results

Colon format
—
Hyphen format
—
Cisco format
—
OUI
—
Manufacturer
—
Address Type
—

Overview

The MAC / OUI Lookup normalizes a MAC address into the common notations, extracts its Organizationally Unique Identifier (OUI), and names the manufacturer when the OUI is in the tool's built-in reference list. It also tells you whether the address is unicast or multicast and whether it is universally or locally administered.

Use it to identify unknown devices seen in a switch's MAC table, a DHCP lease list, or an ARP cache, and to convert addresses between the formats different vendors use.

How It Works

A MAC address is 48 bits, usually written as six hexadecimal bytes. The first three bytes are the OUI, assigned by the IEEE to a manufacturer; the last three are chosen by that manufacturer for each device. The tool strips separators, checks that exactly 12 hexadecimal digits remain, and then formats the result as colon (B8:27:EB:12:34:56), hyphen (B8-27-EB-12-34-56), and Cisco dotted (B827.EB12.3456) notation.

Two flags live in the first byte. The least significant bit says whether the address is unicast (0) or multicast (1). The next bit says whether it is globally unique, burned in by the manufacturer (0), or locally administered (1), assigned by software or the operating system.

The lookup runs entirely in your browser against a bundled list of 88 common vendors. It is a convenience list, not the full IEEE registry.

How to Use the MAC / OUI Lookup

  1. Type or paste a MAC address in any common format — colons, hyphens, Cisco dots, or plain hex.
  2. Press Calculate.
  3. Read the normalized forms, the OUI, the manufacturer (if known), and the address type.
  4. If the manufacturer is not found, look up the OUI in the IEEE registry (see Limitations).

Worked Example

Identifying b8-27-eb-12-34-56

A switch lists a device by the MAC address b8-27-eb-12-34-56 and you want to know what it is.

Input

MAC address: b8-27-eb-12-34-56

Output

Colon format:   B8:27:EB:12:34:56
Hyphen format:  B8-27-EB-12-34-56
Cisco format:   B827.EB12.3456
OUI:            B8:27:EB
Manufacturer:   Raspberry Pi Foundation
Address type:   Unicast, Universally Administered (burned-in)

The first three bytes, B8:27:EB, match an entry in the built-in list, so the device was manufactured with a network interface from the Raspberry Pi Foundation's allocation. Because the second-lowest bit of the first byte (b8 = 10111000) is 0, the address is universally administered, and since the lowest bit is 0 it is unicast.

The manufacturer tells you who made the network interface, which is a strong lead rather than proof of what the device is: a vendor's interface can be in many different products.

Interpreting Results

OUI
The first three bytes. Identifies the organization the IEEE assigned the block to.
Manufacturer
Shown only when the OUI is in the built-in list. "Manufacturer not found" means the vendor is not in this list, not that the address is invalid.
Locally administered
Set when software has assigned the address, including virtual machines and the randomized addresses modern phones and laptops use per Wi-Fi network. Such addresses do not identify a manufacturer even if the OUI looks real.
Multicast
Addresses with the multicast bit set are group addresses, not a single device.

Troubleshooting

"Invalid MAC address. Expected 12 hex digits."
Remove stray characters and confirm there are exactly 12 hexadecimal digits (0–9, A–F).
"Manufacturer not found."
Search the OUI in the IEEE public registry. Also check whether the address is locally administered, in which case no manufacturer lookup is meaningful.
A phone shows a different MAC on every network.
That is MAC randomization, a privacy feature. The address has the locally-administered bit set. Check the device's per-network Wi-Fi settings for the real hardware address if you need to allow-list it.

Limitations and Accuracy

  • Only 88 OUIs are bundled. The IEEE registry contains many thousands, so absence from the list says nothing about whether an OUI is registered. Use the IEEE OUI registry for a definitive lookup.
  • The OUI identifies the interface vendor, not the device model, owner, or current location. MAC addresses can be changed or spoofed in software.
  • Only the 24-bit OUI is examined; longer IEEE assignments (MA-M, MA-S) are not distinguished.

Data Handling

Runs in your browser. The MAC address you enter is normalized and looked up in a list bundled with the page, so it never leaves your browser.

Frequently Asked Questions

Can I use a MAC address to find who owns a device?

No. The OUI identifies the manufacturer of the interface only. Ownership and identity come from your own inventory, DHCP, or authentication logs.

Why do virtual machines have unfamiliar OUIs?

Hypervisors use their own OUIs (the list includes VMware, VirtualBox, Hyper-V, QEMU/KVM, and Xen) or locally administered addresses.

Which format should I use?

Whichever your platform expects: colons are common on Linux and macOS, hyphens on Windows, and dotted groups of four on Cisco IOS.